CLAREX® Super-Hardcoat PMMA Sheet

Harder to sctratch than standard hardcoat!


CLAREX® Super Hardcoat is a new scratch-resistant coating - available in a wide range of thicknesses - 0.2mm to 5.0mm.

CLAREX® SUPER HARDCOAT ACRYLIC (PMMA) A new scratch resistant coating which is even harder to scratch than their standard hardcoat. That’s impressive considering their standard hardcoat is already one of the best you can find!

THICKNESS - 0.2, 0.3, 0.4, 0.5, 0.8, 1.2, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0 and 5.0mm

MACHINING / PRINTING -  Available to customer specification.

  • Available in a wide range of thicknesses (0.2mm to 5.0mm)
  • Coating on one or two sides
  • Available one side 9H / 2nd side 6H for improved impact resistance
  • No retardation / no birefringence
OPTIONAL NON-GLARE TEXTURES
PROPERTY METHOD Super Hard Coat RHG20
Pencil Hardness 45 Degree at 1kg Load
(JIS K5600)
9H
Coating Adhesion Cross Cut Measurement
(100 Squares)
100 / 100
Abrasion Resistance #0000 Steel Wool
10 Cycle at 1kg Load
NO SCRATCH
Total Light Transmittance Measured by Haze Meter
(JIS K7105)
92%
Haze   0.17
Heat Deflection Temperature JIS K7121 110 °C
Coefficient of Thermal Expansion JIS K6911 7×10-5 cm/cm°C
Max Recommended Continuous Temperature   80 °C

The factory can now offer these materials upon request with higher temperature ratings, 90-95°C. Please contact us for more info.